Yamaha Bansheenew Driveline Design Untrenched Custom Banshee Cases

  

These are our brand new die cast Driveline Banshee cases that we have been developing for the last 5 years. We have made a lot of changes to the OEM design while still retaining the stock look as best we could. We have added extra material in all the places the stock cases were lacking for today's larger stroke cranks and aftermarket cylinders. You can trench these cases up to a 14mm stroke without any epoxy or welding. The top case can be bored and machined to fit any stock 64mm or 68mm bore size along with larger bores like the Super Cub, Chubby Cub or DM cylinder.

This set of cases are UNTRENCHED which will fit a stock stroke crank up too a 4mill crank. You can fit a stock cylinder or any 68mm aftermarket cylinder and have a lot more top gasket sealing area compared to OEM especially with cub, or serval cylinders that have larger transfer areas. The folllowing items are included with every case set.

Top case cylinder studs: Qty = 10 (We add 2 extra longer studs for cub style cylinders). Lower case studs: Qty = 8. Front and rear mounting dampners: Qty = 4. Case/side cover locating dowels: Qty = 3.

Cylinder locating dowels: Qty = 4. Shift shaft bushing: Qty = 1. Shift fork shaft plugs: Qty = 2.

Kick starter assembly mounting post: Qty = 1. Clutch actuator bearing: Qty = 1.