All our Graphics have been tested and installed by our team before making it available for sell! We are not responsible for mishandling or bad installation. We strongly recommend looking for professional installer. Please double check your vehicles Brand, Model and Year before purchasing.
1:1 Fit verified ONLY FOR OEM PLASTICS. Graphics comes in 12 Mil Thickness (If you prefer 21 Mil would have an extra cost). IF YOU LIKE THE DESIGN BUT IS NOT FOR YOUR MODEL OR YEAR, DON'T WORRY ASK US AND WE CAN TRANSFER THE DESIGN TO YOUR SPECIFIC MODEL. IF YOU WANT GRAPHICS RESISTANT TO BLOWS, SCRATCHES AND WITH HIGH ADHERENCE.WE HAVE THE PERFECT OPTION FOR YOU 100% GUARANTEED. Made with high quality vinyl. Over laminated for extra durability. Personalize your racing number and name.
High Tack adhesive for Low Surface Energy. IF YOU WANT TO MAKE A CUSTOM GRAPHIC WRITE US WITH CONFIDENCE. If you want to add personalized name or racing number, please send us a message. Within the first 24 hours. High-performance calendered overlaminate with UV protection.Provides excellent print protection and prevents premature fading and yellowing. Up to a 6-year outdoor life. And exceptional choice for outdoor decals, fleet graphics, and more. Is a revolutionary print film, with super strong adhesive for application of graphics to motocross bikes, ATVs, Jet Ski, Karts, and other extreme applications. Clean your plastics, hands and work area.
Remove dirt, oil old adhesive and anything else from the front and back side of your plastics. A good brake cleaner will do the perfect job for degreasing. Before applying, trim the paper backing the perimeter as close to the graphic as possible (without cutting the graphic). Check the alignment of holes, vents curves and edges of the graphic against the plastic. Peel off half of the backing, being careful not to allow dust or debris to get on the adhesive side.
Slowly apply by sliding one finger back and forth along the graphic, pressing out any air bubbles and wrinkles, lining up with holes and edges. Heat may be applied with a heat gun or hair dryer during this process to help remove wrinkles and air bubbles. WARNING: Excessive heat will cause the decal to overstretch and distort the image.
We will make every effort to correct the problem. It is impossible to address issues if we do not know about them! STAND OUT FROM THE CROWD WITH OUR GRAPHICS.
####x200B;Our focus is on delivering premium products with 100% customer service and satisfaction in mind. We utilize the highest quality, superior graphics materials and product technologies integrated through our innovative research and development process. ####x200B;We look forward to hearing from you soon. THIS GRAPHICS COMES IN 12 MIL THICKNESS (IF YOU PREFER 21 MIL WOULD HAVE AN EXTRA COST).We are specialists making custom graphics for: MX - ATV - UTV - JET SKI -STREET BIKES - GO KARTS & More. All goods provided by INNOVATIVE PTY have been tested and installed by our team before making it available for sell. Innovative PTY will make every effort to correct the problem. Listing and template services provided by inkFrog. This item is in the category "eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Decals, Emblems". The seller is "innovative-prints-and-graphics" and is located in this country: PA. This item can be shipped worldwide.