Banshee Cheater Kit 4 mil Fully Ported Stroker Cylinders Crank Complete Rebuild

  

NEW 64mm after market stock bore cylinders. Full race port and polish for 4mm stroker crank. Wiseco 795 series forged stroker pistons. Hotrods +4mm stroker crank assembly with rods. Pro Design or Noss billet cool head.

Pump gas billet cool head domes machined for 4mm stroker crank. TZ and Maxload outer main bearings. Clutch arm and thrust bearings. Complete top and bottom end gasket kit.

Complete maxlock crankcase stud kit. Cylinder to case dowel pins. Intake manifolds for stock carbs. No modifications required except re-jetting carbs.

Can be used with stock carbs that are re-jetted but aftermarket exhaust is recommended. Everything is new in the original packaging.

PRICES AND LISTINGS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE. DO YOU MAKE A LIVING WORKING ON BIKES? ARE YOU A SHOP OR DEALER. Visit us in person from 7am to 4pm at 1538 Howard Access Rd, Suite A, Upland, CA 91786.

PRICES ARE SUBJECT TO CHANGE AND LISTINGS MAY BE REVISED AT ANY TIME WITHOUT NOTICE. Over 99% of people in the world are not qualified to build an engine. It requires special tools and has to be done 100% correct. We ALWAYS STRONGLY recommend parts be installed by a qualified, experienced mechanic.

It is the responsibility of the person assembling and tuning the parts to make sure they work correctly. If for any reason a stud fails during use, not installation, we will send an entire new stud kit. If your Alpha Cub cylinder fails for any reason not related to installation, tuning, break in, or misuse we will fix the cylinder free of charge. If it can not be fixed we will supply you with a new one.

It must be sent to us for inspection, and Millennium Technologies will determine if the cylinder is repairable. Positive reviews and feedback are greatly appreciated. That could be hundreds or dollars for 1 minute of your time!