373cc ASSASSIN Cylinders Banshee TOP + BOTTOM ENDVito's 4mm crank 513 pistons

  
These are new 64mm steel bore stock appearing Assassin cylinders. FITS: +4mm stroker short rod crankshaft (54mm stroke, 110mm rods) for use with Wiseco 513 series long rod pistons. These are included with this kit. Cylinders are machined to specific heights so there are no spacer plates required, just use the included standard. Cylinders can be bored to any Wiseco 513 series piston size that is available. The sleeve can eventually be bored to a 68mm bore size once the smaller bore sizes are used up. Since the cylinder itself is taller to match the 4mill long rod crankshaft and the Wiseco 513 series piston, you can use the factory OEM head and head gasket! Of course any aftermarket Cool head head and small bore dome that fits a OEM cylinder can be used with this kit. This cylinder kit has moderate exhaust port timing for riders who are wanting a broad usable power band suitable for all types of riding.

Cylinder kit will work with basically any aftermarket pipe that works on OEM cylinders. The port specs on these cylinders are 194.5 exhaust and 124.0 transfer durations.

The exhaust port is much larger than the stock cylinder along with all the other benefits the assassin cylinder has like larger intakes, triple exhaust ports and larger transfer area. This kit gives you huge amount of usable power. It's a steel sleeve, just like the factory Banshee cylinders. That means your local shop can bore them out, and there is no need to send them away to get Nikasil plated, and wait 6 weeks to get them back!

Xxx please note, you can also run Banshee Wiseco 795 pistons in this if you use a 4mm long rod crankshaft (58mm stroke, 115mm rods) xxx. 2 cylinders with steel sleeves 64mm bore size. 1 Vito's Performance +4mm stroker short rod crankshaft (54mm stroke, 110mm rods). 2 Wiseco forged 64mm 513 series long rod style pistons, rings, wrist pins and circlips.

2 rubber water jacket plugs. 10 stock style head studs. 1 Vito's Performance crank seal kit. 1 Vito's Performance clutch cover gasket. Our mission is to provide you with the best products and the best service in the industry.

We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. The following rules apply to new items.

Products must be in original packaging and in a new and resalable condition. Any product that was used or fully/partially installed is non-returnable.

We will do our best to solve your problem as quickly as possible.